Language: 
Products
Power Supplies
- 80mm Fan
- 120mm Fan
- 140mm Fan
- FANLESS
- Modular
- 80 PLUS
Enclosures
- 2.5" External Enclosure
- 3.5" External Enclosure
- NAS
- RAID
Accessories
- Laptop Cooler
- Converter
- Power Tester
- LED Cooling Fan
Model#
HD-250C-eSATA

HD-250C-eSATA

More View
1 year limited warranty
 Overview   Features   Specification   Packing   Support   FAQ 
2.5 SATA Hard Drive
1.Attach hard drive to the unit.
2.For USB interface:
  • For desktops, please use the Y-USB cable and connect both (2) USB into the port located at the rear of your PC. Connect the other end of the USB cable to the unit.
  • For notebooks, please use the Y-USB cable and connect both (2) USB into the port of your notebook. Connect the other end of the USB to the unit.
  • Please refrain from using external USB hubs or other case USB ports (for PCs).
Y-USB Cable:
3.For eSATA Interface
  • For desktops, please use the Y-USB cable and connect 1 USB into the port located at the rear of your PC; connect the eSATA cable to the unit.
  • For notebooks, please use the Y-USB cable and connect 1 USB into the port of your notebook. Connect the eSATA cable to the unit.
  • Please refrain from using external USB hubs or other USB ports (for PCs).
  • Please also make sure you are using the main USB cable as shown below.
Y-USB Cable:
eSATA Cable:
4.Windows will detect and pre-install drivers automatically.
5.Make sure hard drive is partitioned / formatted through disk management (for new drives).
6.Older hard drives, please verify under disk management that your drive is partitioned / formatted. You may need to assign a new drive letter manually.
Note: Notebook or desktop units from proprietary companies like Compaq, Dell, HP, etc. may have security features that blocks detection of the drive when installed to other units or enclosures.

about us | contact us | site map



2009 CoolMax Technology Inc. All Rights Reserved.